Tengugurl
Cheng's Errand Boy
- Joined
- Feb 9, 2017
- Posts
- 111
Hi all!
My Atomiswave was working fine until it just stopped.
Had a look on the board and noticed the diodes ZD7 in particular smoked.
I know these are for ESD protection and I have seen a few forums say "just remove it, it will work still" well, I must be very unlucky or something as I removed the diode and tried to see if it would boot and no luck.
Any ideas how I can get my board working?
The fan turns on but no signal.
I would be happy to replace the diode but Atomiswave forums/ repair guides are slim pickings.
Love my Neo Geo forum people! Bunch of techy gurus!
Thanks,
Looking forward to trying anything.
My Atomiswave was working fine until it just stopped.
Had a look on the board and noticed the diodes ZD7 in particular smoked.
I know these are for ESD protection and I have seen a few forums say "just remove it, it will work still" well, I must be very unlucky or something as I removed the diode and tried to see if it would boot and no luck.
Any ideas how I can get my board working?
The fan turns on but no signal.
I would be happy to replace the diode but Atomiswave forums/ repair guides are slim pickings.
Love my Neo Geo forum people! Bunch of techy gurus!
Thanks,
Looking forward to trying anything.