Results 1 to 1 of 1

Thread: MV1ACH board working properly after replacing orange Neo-Buf

  1. #1
    .
    Join Date
    Jan 2020
    Location
    Canada

    Posts
    7

    MV1ACH board working properly after replacing orange Neo-Buf

    Previously:
    http://www.neo-geo.com/forums/showth...hed-some-light

    So today, I finally pulled out the PCB and the chips I ordered and put together this DIY Neo-Buf chip.



    Soldering was kinda iffy since it's my first time actually using hot air to solder a chip like this. Not to mention the soldering to the actual motherboard was also weird due to the PCB design.



    After a few rounds of back and forth, I managed to solder every connection correctly and now the machine is playing the 161-in-1 correctly. No sign of previous problem AT ALL.

    Just wanted to share the story with some of you who might be scratching your head.



    Last edited by TheJeffChen; 05-23-2020 at 04:20 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •