So my supergun runs on an arcade PSU and I want to be able to control the 5v via an external pot, what size do I need 10k?
I assume desolder the factory pot and reattach the legs, eazy peazy?
So my supergun runs on an arcade PSU and I want to be able to control the 5v via an external pot, what size do I need 10k?
I assume desolder the factory pot and reattach the legs, eazy peazy?
just desolder the original one. add 3 wires, read the value on the pot and replace with another one of the same value that you can keep in place in your supergun housing.