Recommended cap kit for MVS MV4FT

My 4-slot recently developed a slight scratchiness to the audio on the right channel. I swapped speakers, and checked wiring and connection from PCB end of the harness to the speakers, and nothing is standing out. I recently replaced a dead battery, and figure the caps are probably overdue to be replaced.

So my question: which cap kit is recommended for the MV4FT?

Is it this one: https://console5.com/store/snk-neo-geo-mvs-mv4f-mv-4f-cap-kit.html ?

Check your board with the cap maps for the mv4f https://console5.com/wiki/Neo_Geo_MVS#MV4F

I finally got around to pulling my MV4F and documenting the caps. The part number on the bottom board is NEO-MVH MV4-FT3. It seems this is possibly a later revision, with a more compact design?

The desciption of the cap kits at arcadepartsandrepair.com seems to elude to the version with 470uf caps on the top board instead of the more common 1000uf, pointing to a later revision. https://www.arcadepartsandrepair.co...pcb-slot4-pcb-complete-cap-kit-105c-nichicon/

Either way, here's the cap list, in case anyone else ever needs it:

bottom board
4.7uf 25v qty. 8
470uf 16v qty. 6
100uf 16v qty. 4
22uf 16v qty. 4
1uf 50v qty. 2
220uf 16v qty. 2
10uf 16v qty. 2



top board
470uf 16v qty. 2