on 0.6 Beta there was a speed update according to Furrtek's twitter and the 0.6 Beta fw notes, i don't if this changed back on 0.6 fw....
The only annoying thing about the card slot behind the vents, is that you can drop it inside the console if you're not careful and miss the spot.
The status LED is placed in a way that should illuminate the right spot but it isn't the brightest thing in broad daylight.
A way to prevent that would be to stick some mesh tape behind the vents, with a small opening for the card.
Quick question before setting mine up, what file formats are accepted? The website says it must include a cue file, but what about the image itself? I have games in various different formats - ISO, BIN, IMG.
I know I could just try it, but it's not exactly quick copying 50+GB to an SD card so would rather know before copying games across.
I have sent my console and board off to a modding/repair company to fit it for me, and they are reporting that no matter what SD card or firmware file they try, it just shows three red LED blinks:
http://furrtek.free.fr/sdloader/support/ledcodes_en.htm
Apparently he's tried multiple SD cards, but I know the one I sent him was formatted FAT32. I also downloaded the latest 0.06 firmware and renamed it as per the instructions:
http://furrtek.free.fr/sdloader/support/#firmware
He's stumped, any advice?
So it's now nearly a month since my last post, and the issue still isn't resolved. Sorry to 'make it public' but emails to furrtek by both myself and the person doing the mod for me have been ignored. Has anybody else had this problem, or heard from furrtek, or got any other suggestions what the problem might be? Apparently a hardware fault with the SD card board is a possibility, but no replacement has been sent as far as I'm aware...
Well he's updated the news page since my post, so must still be active. It mentions a manufacturing fault, maybe this is why mine doesn't work:
http://furrtek.free.fr/sdloader/news.php
Thanks for that, hopefully will get a replacement too. How did you know it had been sent?
Hi guys! Maybe someone help me.
The console can no longer boot the menu. Its blink blue, 3 times green e after that nothing. Try to replace the sd card, same issue.
I didn't see this code in LED blink codes