- Joined
- Sep 20, 2004
- Posts
- 3,073
I made a custom stick from scratch some time ago and I'm just getting back to seeing what the deal is with this thing - I'm sure it's probably something stupid but figured I'd ask here.
The stick uses DB15 pinout and the intent was to use it both on a supergun and neo mvs.
6 button layout 3 top 3 bottom
Initially i used pin 9 for 2Kick/Medium kick on the gun since it wasn't in use, and left pin 4 for D on the neo.
All directions on the stick and ABC work when pin 4 and pin 9 are connected.
If I only use pin 4 and disconnect pin 9 D doesn't work
If I disconnect pin 4 and use pin 9 for D it doesn't work
If I have both 9 and 4 connected, D doesnt work
Ground loop buzzes out fine and all buttons buzz out fine when depressed so i'm stumped here.
Appreciate the help.
The stick uses DB15 pinout and the intent was to use it both on a supergun and neo mvs.
6 button layout 3 top 3 bottom
Initially i used pin 9 for 2Kick/Medium kick on the gun since it wasn't in use, and left pin 4 for D on the neo.
All directions on the stick and ABC work when pin 4 and pin 9 are connected.
If I only use pin 4 and disconnect pin 9 D doesn't work
If I disconnect pin 4 and use pin 9 for D it doesn't work
If I have both 9 and 4 connected, D doesnt work
Ground loop buzzes out fine and all buttons buzz out fine when depressed so i'm stumped here.
Appreciate the help.