Results 1 to 4 of 4

Thread: LSPC2-A2 Replacement board/ replacement chip

  1. #1
    Kula's Candy
    Evan's Avatar
    Join Date
    May 2016
    Location
    Your trash can

    Posts
    293

    LSPC2-A2 Replacement board/ replacement chip

    I have a neo board with a dead LSPC2-A2 and I was wondering if there was any way I can buy a replacement chip that sits on a board that I can easily solder or something. If not, can I at least get a replacement chip?
    Alright, back again with THE IMMORTAL JOHN HANCOCK

  2. #2
    . Bratwurst's Avatar
    Join Date
    Aug 2016
    Location
    USA

    Posts
    19
    You will probably need to rob it from another Neo Geo. Fortunately should be commonly found on those Chinese MVS single slots you can get cheaply through AliExpress. You will need a hot air focus station to remove the old chip, the donor chip, and then solder the donor chip into place.

    Only worthwhile if the bad Neo board is a valuable one.

  3. #3
    Kula's Candy
    Evan's Avatar
    Join Date
    May 2016
    Location
    Your trash can

    Posts
    293
    Ok, it’s an aes but I don’t think it’s worth it. I’ll just keep the board for parts.
    Alright, back again with THE IMMORTAL JOHN HANCOCK

  4. #4
    Raiden's Valet
    mikejmoffitt's Avatar
    Join Date
    Feb 2014
    Location
    San Jose, CA

    Posts
    581
    I have a 2-slot MVS that works, but has some minor graphical bugs on one slot. I think it might be able to provide an LSPC2-A2 as a donor. I have at least one MV1FZS with bad audio that has this chip as well. PM me if you think you might want one for parts.

    I bet the chip can be removed with just chipquik if you are careful, so the transplant may not be too bad.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •