- Joined
- Jan 20, 2009
- Posts
- 3,077
Long story short, I was trying to adjust volume on a 1-slot board (I think an MV-1A) and the pot was sticking pretty bad. Ultimately, the leads of the volume pot couldn't handle the pressure I was having to put on it, and at least one cracked.
Anyone have the part # or specs for the volume pot, so I can find a suitable replacement?
Long story long - the conversion MVS cab I had as a kid (which started life as a Super Contra) has been through like 5 households between me, my family, and a couple friends. Because my sister's moving, I bought the cab back from my sister, and got it into a friend's hands who only has had pinball up to this point - I'm getting him his first REAL exposure to SNK stuff.
Anyone have the part # or specs for the volume pot, so I can find a suitable replacement?
Long story long - the conversion MVS cab I had as a kid (which started life as a Super Contra) has been through like 5 households between me, my family, and a couple friends. Because my sister's moving, I bought the cab back from my sister, and got it into a friend's hands who only has had pinball up to this point - I'm getting him his first REAL exposure to SNK stuff.