Results 1 to 6 of 6

Thread: Color separation

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Crazed MVS Addict
    Sememmon's Avatar
    Join Date
    Jun 2005
    Location
    Arizona

    Posts
    145

    Color separation

    I've got a rev1 mvs-4-25 that I think has the original monitor installed. I'm not positive on that, but given the shape of the cabinet when I received it, I'm pretty sure it was all original. One of these days, I'll have to get around to the back and check. Anywho, I've noticed over the years that in the top-left corner, I've got a small amount of color separation. For example, on the white cross hatch, I can see separate lines of color for the very top-left-most corner. It is most noticeable on text.. and I can easily see the blue separating from the rest.

    What causes that? Is it fixable? If so, how?

    Thanks for the info/help!

    Edit: It looks to be a Zenith tube in a WG K7000 (or compatible) chassis. Either this (same ICs) or this (Zenith-made K7000?).

    Edit: Here's an example of the separation:
    Last edited by Sememmon; 06-07-2019 at 04:55 AM.
    I Got fucked by Rot for being an idiot

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •