Shinchan
n00b
- Joined
- Feb 18, 2017
- Posts
- 42
I can't seem to find consistent information on MV-1A audio. My goals are:
Convert the board to 5v
Stereo Mod
Send unamplified L/R audio to line out jacks
I've seen guides that tell me that I need to cut some of the 12v traces to allow the board to run on 5v, I've seen guides that tell me I need to build an additional circuit with 3 lines fed in from before the audio amp to get L/R out (I'm guessing some sort of basic amp circuit, but the guide does not say what the circuit actually does).
What is the simplest way to have a working board that is fed by 5v only and get line-level L/R audio that I can send to jacks/AES cable? I'm not sure if everything I'm looking for is a mutually-exclusive step or if there's one method for accomplishing all of the above stated goals in one set of steps.
Convert the board to 5v
Stereo Mod
Send unamplified L/R audio to line out jacks
I've seen guides that tell me that I need to cut some of the 12v traces to allow the board to run on 5v, I've seen guides that tell me I need to build an additional circuit with 3 lines fed in from before the audio amp to get L/R out (I'm guessing some sort of basic amp circuit, but the guide does not say what the circuit actually does).
What is the simplest way to have a working board that is fed by 5v only and get line-level L/R audio that I can send to jacks/AES cable? I'm not sure if everything I'm looking for is a mutually-exclusive step or if there's one method for accomplishing all of the above stated goals in one set of steps.