Sorry if this is the wrong place to post this but is there any modders on here that can do a HDMI mod on my N64?Thanks
PM Madman? He cannot do the work but he'll appreciate the sentiment.
If your N64 is modded for RGB, the OSSC works perfectly for me. If not, you're going to need to use either a framemeister or something with S videoI see the N64 HDMI mod is not cheap.Is there a good upscaler that you guys would recommend?
Is the HDMI mod compatible with any N64 regarding serial #?
Is the HDMI mod compatible with any N64 regarding serial #?
Yes it is.
The UltraHDMI board works with any serial or region, it just hooks into the PPU with a thin FFC cable, that is a bitch to solder if you don't have good equipment and a bit of practice.
If you know what you're doing, it only takes ten minutes to install, with making the hole for HDMI connector, being the most time consuming.
I was thinking that just for the anti aliasing removal. Is it that drastic of a difference?Nice, glad the HDMI mod doesn't require a certain serial numbered unit. Definitely getting one of these done soon.
I was thinking that just for the anti aliasing removal. Is it that drastic of a difference?
There's a 'no-cut' mod for that now. Retro RGB had an article about someone in the community selling a 3D printed riser so that you don't need to cut the shell of the console anymore.