Results 1 to 3 of 3

Thread: Qsound without Capcom amp ?

  1. #1
    Member escarioth's Avatar
    Join Date
    Jun 2015
    Location
    quebec

    Posts
    33

    Qsound without Capcom amp ?

    Can it be done ?
    i've got a MK2 cab and its mono.
    I often switch from killer instinct 2 and some cps2 games.
    i wanted to use a diferent set of speakers to hear Stereo from CPS2.

    i did some stuff with a small amp.(Kinter MA-170) and changing in-game setup but still only get sound out of the mono speaker from the cab.

    Volts on my psu are right at 12v and 5v.

    i'm pretty bummed out....thought it would work :/
    any ideas ?
    Last edited by escarioth; 02-05-2019 at 10:34 PM.

  2. #2
    Member escarioth's Avatar
    Join Date
    Jun 2015
    Location
    quebec

    Posts
    33
    Ah well.. i found what was wrong
    so in case anyone would ever wonder what to do (if it might interest someone)

    -Hook amp to the cps2 white/red + extra speakers
    -Find a way to block mono from jamma...in my case i had extra harness and only cut the + and - wires.
    (that way i didnt have to cut my original jamma :3 )
    -Be sure to have stereo selected from the CPS2 setup (might need to reboot if it was on mono im not sure)
    -Hold volume down before booting the cab and keep holding the button for 5-10 sec.
    -Put volume to max and adjust with amp

    yay Qsound

  3. #3
    . wuemura's Avatar
    Join Date
    Jun 2019
    Location
    Brazil

    Posts
    7
    It is not just an amp, the amp is the key to unlock QSound information encoded within the sound, without the amp, there is no Qsound effects.
    Friends don't let friends play MAME

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •