MS2931 with dim picture

theGau

Overtop Pathfinder
15 Year Member
Joined
Mar 21, 2004
Posts
104
This is what it looked like before doing anything to the monitor as well as it is now, I just "clean and balance" each gun and it got me back to the original picture but it really is unplayable in the condition.

https://scontent.fagc1-2.fna.fbcdn.net/v/t1.15752-9/s2048x2048/50542085_528591044315870_7762523105364279296_n.jpg?_nc_cat=108&_nc_ht=scontent.fagc1-2.fna&oh=cf466e2c1b119aa507d6f83781a59d39&oe=5CBF5EEB

And this is what it looks like if I rejuve the blue and green guns respectively, but as a note I could rejuve all three but whichever I do last is what color will be dominate.

Blue pic
https://scontent.fagc1-2.fna.fbcdn.net/v/t1.15752-9/50416154_390533685052189_9198106694167560192_n.jpg?_nc_cat=108&_nc_ht=scontent.fagc1-2.fna&oh=ac17103f7fbeb40926dd2f569f1eceeb&oe=5CC1943A
Green pic
https://scontent.fagc1-1.fna.fbcdn.net/v/t1.15752-9/50234381_369170897247262_3661242062566588416_n.jpg?_nc_cat=102&_nc_ht=scontent.fagc1-1.fna&oh=fef07d256817efab29d2834512d94fa0&oe=5CC559A7

I would have a red pic too but forgot to take a pic of it, but you should get idea of the issue by now.

Tube is a A68LBT696X
 

Niko

Whip's Subordinate
Joined
May 15, 2014
Posts
1,773
Before the rejuvenation process, I'd have suggested adjusting the voltage on the flyback.

But now, I have no idea.
 

theGau

Overtop Pathfinder
15 Year Member
Joined
Mar 21, 2004
Posts
104
Before the rejuvenation process, I'd have suggested adjusting the voltage on the flyback.

But now, I have no idea.

I did and it didn't have a effect on the screen. It is like I can either have 100% of one gun or 10% of all three.
 

Heinz

Parteizeit
15 Year Member
Joined
Feb 13, 2005
Posts
22,298
So you decided to do a rejuve before you adjusted the screen pot on the flyback?
 

theGau

Overtop Pathfinder
15 Year Member
Joined
Mar 21, 2004
Posts
104
No I tried adjusting everything before the rejuve, I'm not a moron.
 
Top