Results 1 to 7 of 7

Thread: Neo Geo 64 Revisions vs Versions compatibility

  1. #1
    Somewhere in Europe.

    Join Date
    Jul 2005
    Location
    Neo Geo World

    Posts
    629

    Neo Geo 64 Revisions vs Versions compatibility

    Ok, so here's the deal, and the problem. I'm aware of different board versios and revisions. It's telling them apart that's problematic. I would like to gain some clarity when it comes to revisions, namely:

    ● Are all versions [fighting, driving, shooting, korean] available in both revision 1 with the volume pot?

    ● Are there any model numbers or serials that can with all certainty tell you which board you're looking at?

    ● How does one tell the boards within the same revision apart, visually? More specifically, how does one tell the rev. 2 JAMMA fighting game board apart from the rev. 2 korean one, which cal only run sahsho games?

    ● I only have the fighting game rev. 2 board. Are there any additional sub-baords in Xtreme Rally and Beast Busters? There seems to be space and connectors for that in the housing.

    I'd appreciate any info, but the most important part is telling the boards apart, especially the korean one from a fighting game one. Thanks!

  2. #2
    Host for Orochi
    suicidekiller's Avatar
    Join Date
    Feb 2003
    Location
    Germany

    Posts
    1,447
    In general: The easiest way to identify the boards is from the connectors edge as all are different.

    Rev. 1 Fighting: JAMMA edge & volume pot
    Rev. 2 Fighting: JAMMA edge & one red cable harness from top to bottom board
    Driving: JAMMA edge & two multi-color cable harness from top to bottom board
    Shooting: no JAMMA edge at all, just molex connectors

    In particular:
    Quote Originally Posted by Morden View Post
    ● Are all versions [fighting, driving, shooting, korean] available in both revision 1 with the volume pot?
    No. The volume pot on the connectors edge is only on the Rev. 1 Fighting Board. This is also the only board that got a second revision.

    ● Are there any model numbers or serials that can with all certainty tell you which board you're looking at?
    See above. I don't think there are numbers or serials that matter to this cause.

    ● How does one tell the boards within the same revision apart, visually? More specifically, how does one tell the rev. 2 JAMMA fighting game board apart from the rev. 2 korean one, which cal only run sahsho games?
    First off, I don't think the Korean board got a second revision. And then the Korean board should be quite rare too. Never came around to see one consciously. Who needs them anyway

    ● I only have the fighting game rev. 2 board. Are there any additional sub-baords in Xtreme Rally and Beast Busters? There seems to be space and connectors for that in the housing.
    You have sub boards for the driving and shooting boards but they are not on the main unit themselves. Just from the looks the boards are the same (except for the connectors edge, see above)


    Quote Originally Posted by Pep
    Your nickname suits very well for someone who has decided collecting NGH

  3. #3
    Somewhere in Europe.

    Join Date
    Jul 2005
    Location
    Neo Geo World

    Posts
    629
    Thanks for the reply! This is essentially everything I needed to know. In other words, if you have a rev. 2 board, it can only be the one compatible with all four fighting games. Which is what you'd want, anyway. This wasn't clear when I read arcadeotaku and Wikipedia entries.

    Too bad NG64 titles never got ported. I don't even count Wild Ambition for PlayStation, since it's such a bad conversion. Multi-layered and animated backgrounds are mostly static in the PlayStation version, animation is choppy as hell, and resolution is lower.

  4. #4
    Host for Orochi
    suicidekiller's Avatar
    Join Date
    Feb 2003
    Location
    Germany

    Posts
    1,447
    Quote Originally Posted by Morden View Post
    Thanks for the reply! This is essentially everything I needed to know. In other words, if you have a rev. 2 board, it can only be the one compatible with all four fighting games. Which is what you'd want, anyway. This wasn't clear when I read arcadeotaku and Wikipedia entries.
    Yup, the Rev.2 board is what you want for the fighting games Do you have all four ones yet? I can really recommend the first SS64 which then again is the most expensive one of the bunch unfortunately. But it's a great game, much better than the second one IMO. FF:WA is also a very solid game. Buriki One is kinda experimental but still worth checking out.

    Enjoy the games


    Quote Originally Posted by Pep
    Your nickname suits very well for someone who has decided collecting NGH

  5. #5
    Somewhere in Europe.

    Join Date
    Jul 2005
    Location
    Neo Geo World

    Posts
    629
    I'm currently in the process of acquiring SS64, Buriki and WA. I've had Warrior's Rage for a while now, and did get a chance to borrow other two games, except for Buriki. But hopefully, within a month or so, I'll have the set. One thing that bothers me a bit is the forced interlaced mode. I usually turn it off in Namco's System 12 games [Soul Calibur, Tekken 3, Tekken Tag], because I don't like the flicker.

  6. #6
    drunk downunder!
    aka. Muff Diver.
    lachlan's Avatar
    Join Date
    Feb 2005
    Location
    A Hard Earned Thirst

    Posts
    11,533
    I've owned WA, Buriki and SS64-2 before, WA would have to be the best game out of those three. In all honesty the Hyper is a cool look at what could've been but at the end of the day you're going to have more fun with the MVS.


    !!

  7. #7

    Neo Alec's Avatar
    Join Date
    Dec 2000
    Location
    USA

    Posts
    8,034
    I have a Rev 1 fighting board because the new one I bought was so cheap. To run it, I have the auxiliary power connector it uses wired to my supergun with an arcade power supply. Still sometimes the video output seems to get messed up after playing for a while. Probably something wrong with how my supergun was wired. Working on adding some caps and resistor to the recently added pots.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •