Results 1 to 8 of 8

Thread: How to Open a Z Back dynamo?

  1. #1
    Cholecystectomy Required.
    ggallegos1's Avatar
    Join Date
    Oct 2013
    Location
    Milford, CT

    Posts
    3,410

    How to Open a Z Back dynamo?

    Gents,

    This may be common knowledge to many of you, but im struggling here.

    I just picked up a z back dynamo cab and for the life of me cannot figure a way to open the back door beyond the small insert that grants access to the tube. I'll upload pics probably tomorrow, as my phone is SOL.

    There are no screws, door hinges, locks, or even movable parts that I can see. There's a ton of stuff in the bottom of this cab including the manual that I want to get access to.

    Any help is appreciated.

    Edit Pics of the back

    IMG_7234.JPG

    IMG_7235.JPG

    There's no screws that I can tell are there, it looks like three solid pieces stapled together into one frame.
    Last edited by ggallegos1; 12-28-2018 at 09:25 PM.
    "I am the master of my fate. I am the captain of my soul."
    Switch FC 0965 2531 6217

    Quote Originally Posted by ObeyMyEgo View Post
    ggallegos1 Is a cock sucking faggot. That is all.

  2. #2
    I survived Secret Santa
    It wasn't Easy.
    JoeAwesome's Avatar
    Join Date
    Feb 2016
    Location
    Texas

    Posts
    2,067
    I don't own one, but maybe go through the coin slot lock? Doesn't look like you can get in through the back.
    Quote Originally Posted by Famicommander View Post
    Unify the IWGP Heavyweight, Jr Heavyweight...
    Spoiler:

  3. #3
    Astra Superstar

    Join Date
    Oct 2016
    Location
    Pico Rivera, CA.

    Posts
    809
    Quote Originally Posted by ggallegos1 View Post
    Gents,

    This may be common knowledge to many of you, but im struggling here.

    I just picked up a z back dynamo cab and for the life of me cannot figure a way to open the back door beyond the small insert that grants access to the tube. I'll upload pics probably tomorrow, as my phone is SOL.

    There are no screws, door hinges, locks, or even movable parts that I can see. There's a ton of stuff in the bottom of this cab including the manual that I want to get access to.

    Any help is appreciated.

    Edit Pics of the back

    IMG_7234.JPG

    IMG_7235.JPG

    There's no screws that I can tell are there, it looks like three solid pieces stapled together into one frame.
    Try posting the question on klov website.

  4. #4
    Mickey's Coach
    NERDtendo's Avatar
    Join Date
    Jul 2013
    Location
    Brush, CO

    Posts
    732
    You would remove the sliding drawer where the PCB is mounted and go in through the front of the cab. Reach up through the coin door hole and unlatch the control panel on both sides. The unlatch the drawer if there is one on the left or right or both sides. Then the drawer, with the control panel attached will just slide out. Make sure to disconnect the wiring harnesses if you pull the sliding drawer all the way out.

  5. #5
    Cholecystectomy Required.
    ggallegos1's Avatar
    Join Date
    Oct 2013
    Location
    Milford, CT

    Posts
    3,410
    Quote Originally Posted by NERDtendo View Post
    You would remove the sliding drawer where the PCB is mounted and go in through the front of the cab. Reach up through the coin door hole and unlatch the control panel on both sides. The unlatch the drawer if there is one on the left or right or both sides. Then the drawer, with the control panel attached will just slide out. Make sure to disconnect the wiring harnesses if you pull the sliding drawer all the way out.
    I appreciate it. The drawer didnt want to give without some force, as it had not been moved in years. I also had to remove the coin door and box with frame in order to access the back, had about $6 in quarters and a small pocket knife in there lol
    "I am the master of my fate. I am the captain of my soul."
    Switch FC 0965 2531 6217

    Quote Originally Posted by ObeyMyEgo View Post
    ggallegos1 Is a cock sucking faggot. That is all.

  6. #6
    Mickey's Coach
    NERDtendo's Avatar
    Join Date
    Jul 2013
    Location
    Brush, CO

    Posts
    732
    Quote Originally Posted by ggallegos1 View Post
    ...had about $6 in quarters and a small pocket knife in there lol
    Bonus!

  7. #7
    Mickey's Coach
    NERDtendo's Avatar
    Join Date
    Jul 2013
    Location
    Brush, CO

    Posts
    732
    Those 3 Koam Z Backs are very cool.

  8. #8
    Super Spy Agent
    Lime2K's Avatar
    Join Date
    Jul 2004
    Location
    Las Vegas, NV

    Posts
    759
    Hey, that's the same cab I've got! Can confirm that the advice you've been given already in this thread is correct. (I went on a mad zip-tie spree with the wiring in mine, makes it look so pretty inside lol :P
    Lime2K
    The One True Evil Overlord

    DAN HIBIKI'S ULTRA DOJO
    Turning Ass-Kicking Into An Art Form

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •