- Joined
- Apr 1, 2002
- Posts
- 2,188
I am prepping to recap my PAC-S10 SEGA module, and on the Console 5 website it seems to be recommended to change the battery as well.
They recommend adding a horizontal battery holder but to the bottom of the unit rather than the top of the board.
Has anyone done this repair/modification? I don't know why they recommend it go on the underside as it seems there would be plenty of space on the top (I could be wrong)
Also the battery Holder they sell only has 2 pin while the origin uses 3, with of the 2 positive terminals would I solder the one pin into? or does it even matter?
Thanks in advance
They recommend adding a horizontal battery holder but to the bottom of the unit rather than the top of the board.
Has anyone done this repair/modification? I don't know why they recommend it go on the underside as it seems there would be plenty of space on the top (I could be wrong)
Also the battery Holder they sell only has 2 pin while the origin uses 3, with of the 2 positive terminals would I solder the one pin into? or does it even matter?
Thanks in advance