makinavaja
n00b
- Joined
- Dec 11, 2017
- Posts
- 31
Hi!
Recently I installed an unibios to my neogeo aes. I unsoldered the original eprom to place a socket (no piggybacking). Unfortunately, during the process 4 tracks were damaged, but I managed to find and repair them with wires.
Now, it seems to work... well, not always...
Just look this video I uploaded:
If I use the neogeo mother board out of the case, or just using the botton case, the console works perfectly but, if I put the top case of the console, it doesnt works.
Also, just using the board naked, withouth the case, as you can see you the video, it works but if I put my hand near the eeprom (but I dont touch anything), it fails. It seems like an static electricity problem!
I have tested several eeproms, and nothing changes.
Does anyone knows whats happening here? any solution?
Recently I installed an unibios to my neogeo aes. I unsoldered the original eprom to place a socket (no piggybacking). Unfortunately, during the process 4 tracks were damaged, but I managed to find and repair them with wires.
Now, it seems to work... well, not always...
Just look this video I uploaded:
Also, just using the board naked, withouth the case, as you can see you the video, it works but if I put my hand near the eeprom (but I dont touch anything), it fails. It seems like an static electricity problem!
I have tested several eeproms, and nothing changes.
Does anyone knows whats happening here? any solution?
Last edited: