Hi,
I got a MVV-2F MVS stuck on a click of death.
What I already done (or at least what I remember) is:
Also:
As OE is always high i check NEO-EO, G0 and C1. This looks ok as SROMOE L and SROMOE U stay high all the time too (so the AND gate outputs a high too).
I suspect C1 is malfunctioning, or at least something is messing up with it.
Is there anything I can do to narrow the origin of the problem ?
Thanks a lot
I got a MVV-2F MVS stuck on a click of death.
What I already done (or at least what I remember) is:
- checking for bad traces - both looking at them and using a multimeter
- removing the battery (had no leak)
- changed work ram
- removed backup ram
- tried unibios and diagbios
- checked 5v and 12v
Also:
- VEC stay low all the time (this looks normal)
- OE# on bios chip stay high all the time :/
As OE is always high i check NEO-EO, G0 and C1. This looks ok as SROMOE L and SROMOE U stay high all the time too (so the AND gate outputs a high too).
I suspect C1 is malfunctioning, or at least something is messing up with it.
Is there anything I can do to narrow the origin of the problem ?
Thanks a lot