Results 1 to 13 of 13

Thread: Need help with Nanao 2931 making loud hum

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    .
    Join Date
    Apr 2018
    Location
    United States

    Posts
    4

    Need help with Nanao 2931 making loud hum

    I have a Nanao 2931 monitor that is humming pretty loud. It arrived in this condition and I feel like the sound it is making is not normal. Full disclosure: I have next to no experience with CRT monitors.

    Here is a video: https://streamable.com/e0zwk

    Is the sound normal and if not what might it be?

    Thanks for any help!

  2. #2
    Formerly Raz_Hoe.
    RAZO's Avatar
    Join Date
    Dec 2006
    Location
    New Jersey

    Posts
    6,811
    That squealing noise is most likely coming from the flyback on the monitor. I had that same issue with my Nanao MS9 and it was driving me insane. That high pitch squealing is annoying as shit. Never fixed Mine, just replaced the monitor but pretty sure one of the Monitor Guru's here will help you figure it out.

    Try pulling out the Chassis, Do a thorough cleaning and pop it back in again.

  3. #3
    .
    Join Date
    Apr 2018
    Location
    United States

    Posts
    4
    Thank you for the reply! It was supposedly fully refurbished when I received it. That's part of the reason why the noise is concerning to me. It isn't as loud when the jamma board is unplugged and started without a game. I'm going to try VGA and see if it makes a difference.

  4. #4
    Juzoh's Gym Trainer
    ebinsugewa's Avatar
    Join Date
    Jul 2013
    Location
    MA crew

    Posts
    2,474
    That does sound like the flyback. However, replacements aren't easy to find to my knowledge. If it gets worse when there's video on the screen (especially white) you might need to adjust the screen pot down on the flyback itself. If you have a board with good video test try to adjust your brightness using that. Try different combinations at the flyback and on the remote board to try to reduce the hum.

  5. #5
    .
    Join Date
    Apr 2018
    Location
    United States

    Posts
    4
    Thank you for the reply!

    Does a flyback making that sound indicate that is has problems or may be close to dying? I still have the option to return the unit, but really do not want to go through that hassle.

    I adjusted the nob that said "screen" that was located on a black plastic box type thing and that seemed to help. It is also not nearly as loud when connected via VGA.

    One thing that I just noticed is my controls are now not working. They were working fine when playing a Jamma game, but since putting this monitor in they are dead. Could that be related?

  6. #6
    drunk downunder!
    aka. Muff Diver.
    lachlan's Avatar
    Join Date
    Feb 2005
    Location
    A Hard Earned Thirst

    Posts
    11,901
    Flybacks are not hard to find they are impossible to find. Finding another chassis is the only real option with this series of Nanao chassis, that's the MS-293x series which encompasses the MS-2930,31,32,33 and 34. 2930/31/33 are all Tri Sync with the latter 2 being auto sync models. 2932/34 are VGA only chassis. just a bit of FYI.

    The 'screen' nob on the flyback which is what you're referring to as the 'black plastic box' will adjust brightness of the screen and the other nob will adjust focus or sharpness of the display though I wouldn't adjust these unless absolutely necessary. eg. adjustments on the remote board aren't satisfactory.

    The sound is more like a buzz than a squeal but I believe it is actually the yoke. The yoke is the large coil that sits around the neck of the CRT. Having wedged convergence strips into mine it doesn't make as much noise as it used to.

    So to answer your fears, no your chassis is not dying but as you know they won't last forever (over 20 years old already!)


    !!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •