In the process of installing a uni-bios on my MV-1C, I lifted a pad. I wasn't able to fully boot the uni-bios and reverted back to the stock bios. Now, without a cart in the slot, I sometimes can boot to the system debug menu, but othertimes I get stuck with a scrambled screen instead of the green boot screen. When this happens, the system hangs and I don't get to the debug menu.
I just received a 138-in-1 and have had no luck getting it to boot, even when I've been able to get to the debug bios.
I haven't been able to trace it down to a specific chip, or wire, but have tried wiggling wires on boot to find the culprit.
Any advice before I give up and buy another MV-1C?
I just received a 138-in-1 and have had no luck getting it to boot, even when I've been able to get to the debug bios.
I haven't been able to trace it down to a specific chip, or wire, but have tried wiggling wires on boot to find the culprit.
Any advice before I give up and buy another MV-1C?