- Joined
- Apr 9, 2009
- Posts
- 540
Hi
I think I got these back in 2011 time frame and kinda forgot about them. I originally thought they were hacks, but re-examining them recently I'm not sure.
I have 2 of them and unfortunately both give crosshatch screens
Both have the same daughter board which is labeled as "PERFECT LOCK SYSTEM VER 3.0". The Lattice chip is a programmable logic device (PLD) and the 2 smaller chips are octal bus transceivers.
I hole is the case was made to allow the daughter board to plugin
In both cases the SNK boards inside contain original roms, except the P1 rom is replaced by the socket/riser that the daughter board plugs into. The original P1 rom is plugged into the daughter board.
(The daughter board is rotate 90 degrees in the pic)
Here is the underside of the daughter board
Curious if anyone has seen these before and thoughts on wtf they would be doing.
-ack
I think I got these back in 2011 time frame and kinda forgot about them. I originally thought they were hacks, but re-examining them recently I'm not sure.
I have 2 of them and unfortunately both give crosshatch screens
Both have the same daughter board which is labeled as "PERFECT LOCK SYSTEM VER 3.0". The Lattice chip is a programmable logic device (PLD) and the 2 smaller chips are octal bus transceivers.
I hole is the case was made to allow the daughter board to plugin
In both cases the SNK boards inside contain original roms, except the P1 rom is replaced by the socket/riser that the daughter board plugs into. The original P1 rom is plugged into the daughter board.
(The daughter board is rotate 90 degrees in the pic)
Here is the underside of the daughter board
Curious if anyone has seen these before and thoughts on wtf they would be doing.
-ack