Results 1 to 4 of 4

Thread: jrok and framemeister

  1. #1
    .
    Join Date
    Oct 2014
    Location
    us

    Posts
    2

    jrok and framemeister

    I have a consolized MVS with a jrok video encoder that works(ed) well on an old projection TV via component. That TV has recently died on me so in an attempt to continue using my MVS I tried hooking it up to my main screen via the Framemeister. Unfortunately, the component hookup only plays sound and displays a blue screen. The Framemeister seems to recognize some signal as it doesn't display the "no input" message but I never get any video. I have confirmed the component output is still working via another monitor. I am guessing the sync signal is causing the issue. Anyone have any recommendations?

  2. #2
    drunk downunder!
    aka. Muff Diver.
    lachlan's Avatar
    Join Date
    Feb 2005
    Location
    A Hard Earned Thirst

    Posts
    10,872
    I would remove the JROK from the equation and use the Framemeister with RGB from your consolized MVS instead.



    !!

  3. #3
    .
    Join Date
    Oct 2014
    Location
    us

    Posts
    2
    Quote Originally Posted by lachlan View Post
    I would remove the JROK from the equation and use the Framemeister with RGB from your consolized MVS instead.
    Can I use the RGB pass-through from the jrok and wire up a JP21 cable from that? Or would I need to build a cable off the jamma edge?

  4. #4

    Neo Alec's Avatar
    Join Date
    Dec 2000
    Location
    USA

    Posts
    7,782
    The pass through sounds like a good plan if you wish to keep the Jrok attached. I ended up eventually getting rid of the encoder entirely on my supergun. I use an external component encoder for my CRT now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •