Page 3 of 4 FirstFirst 1234 LastLast
Results 51 to 75 of 92

Thread: Process of freigting and restoring 6 slot neogeo destination Hawaii IT'S ALIVE

  1. #51
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Im new to this all so no idea what to look for but with that pic and youtube the guy on klov said it could be rebuilt.

    Quote Originally Posted by lachlan View Post
    Something got moved around? there's only the neck board, anode cap and yoke wires. None of those should have moved at all! but easy to fix if that's the case... have you checked it out yourself first? You only need a hairline crack in the neck of the tube man...
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  2. #52
    Blame madman
    You Know You Want To.
    madman's Avatar
    Join Date
    Jun 2007
    Location
    Kentucky State Penitentiary

    Posts
    6,115
    Anyone want to place odds on 8bitforlife electrocuting himself?
    BATTLE OF THE BABES
    ALLI FLANAGAN vs KELSEY LEWIN

  3. #53
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Jokes on you already did. The cord you plug it in was slightly damaged near plug

    Quote Originally Posted by madman View Post
    Anyone want to place odds on 8bitforlife electrocuting himself?
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  4. #54
    drunk downunder!
    aka. Muff Diver.
    lachlan's Avatar
    Join Date
    Feb 2005
    Location
    A Hard Earned Thirst

    Posts
    10,925
    Neck looks fine from that video you sent me, hard to tell because most of the neck is obscured anyway. When you turn the cabinet on does the neck glow? it should have an orange glow in the neck nearest to the neck PCB.

    If there is no glow then there are many reasons why... the troubleshooting begins.

    It is possible cold solder joints have surfaced from it's lengthy and I suspect vibration filled journey.



    !!

  5. #55
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    No glow at all. It has a vert line in middle of screen. I can see metal slug playing on the one line.
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  6. #56
    Paris-Dakar Rally Driver
    Dakar 2003
    ovalfastlx's Avatar
    Join Date
    Jul 2017
    Location
    Redwood City, California

    Posts
    68
    The trip to the islands took its toll on that monitor. I had my Astro City for 350 plus miles riding in the back of the silverado at 80mph and it everything survived but it's another thing to travel on boat. Good luck dude hope you get that sorted out.

    Sent from my SM-G965U using Tapatalk

  7. #57
    Dogg-Father
    Neodogg's Avatar
    Join Date
    Nov 2002
    Location
    Cincinnati, OH

    Posts
    2,801
    Quote Originally Posted by 8bitForLife View Post
    No glow at all. It has a vert line in middle of screen. I can see metal slug playing on the one line.
    Sounds like vertical collapse.
    _ _ ___________________________ _ _
    People I've delt with:
    |Steve Rhine|Vinh|Jeff Kurtz|Kenny Boy|Big Bear|Fox1|Bones|Kid Aphex|Bluevoodu|Kubikiri Basara|Shawn|Michael Yagami|

  8. #58
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Quote Originally Posted by Neodogg View Post
    Sounds like vertical collapse.
    Board rebuild fixes that?
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  9. #59
    Crossed Swords Squire
    Tech&Music's Avatar
    Join Date
    May 2016
    Location
    Right here, right now

    Posts
    192
    Quote Originally Posted by 8bitForLife View Post
    Board rebuild fixes that?
    The CRT still displaying something is at least showing that the tube didn't get destroyed during shipping, so the problem is likely with the board, and a (proper) repair/replacement should fix it.

  10. #60
    Member Max_Headroom's Avatar
    Join Date
    Mar 2015
    Location
    USA

    Posts
    38
    Quote Originally Posted by Neodogg View Post
    Sounds like vertical collapse.
    Yup that's what I'm thinking too. You are in a better spot than I was starting out. Mine came with a tube yoke that wouldn't match to a Wells Gardner (it came with a crappy Kortek chassis).. so Buffet had to hook me up with a complete replacement. In your case you could probably just get a new chassis rebuilt for around 100$ and swap it out. Then you can try repairing the old chassis yourself to start learning how to work on these things.

    Also I noticed in your video you have a pair of black and white wires going to a molex connector that's not going to anything. That should be going to your isolation transformer. Look for another white/black pair coming from the bottom of the cabinet to plug it into. Even with more "modern" self-grounded chassis, if I have a connection to an isolation transformer I go ahead and hook it up. Better safe than sorry.

  11. #61
    You have been
    Officially WY'OWED!
    wyo's Avatar
    Join Date
    May 2013
    Location
    Tampa, FL

    Posts
    4,937
    Quote Originally Posted by wyo View Post
    This is a terrible idea on many levels.
    I tried to warn you... Hope you can get it fixed though.
    Neo Geo AES #011035 #036442 | Neo Geo CD #0002814 | MVS Executive | Razion 1cc Club President
    ATTN NOOBS: Jamma Nation X makes the best CMVS & Superguns, PERIOD! | Unofficial MVS and AES Price Guide
    Quote Originally Posted by Karou View Post
    Non dilated pupils pic=Challenge. I got a hundred dollar cd.

  12. #62
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Quote Originally Posted by wyo View Post
    I tried to warn you... Hope you can get it fixed though.
    well once i get the monitor fixed. There is the process of figuring out wtf the guy who owned it before was thinking. It looks like he put ether a shity black paint on side because its peeling off or a crappy black vinyl. There is also seems like exact'o knife cuts on the sides or its how the cab is. Its going to take a lot of sanding and goof off. My main worry with it is its a little bit frazzled near the t molding. I'm thinking ether t molding got old and shrunk a little or water damage from sucking up moisture? Also in front they put instaled 2 big loops and my guess is for tamper proof bars. I gotta get rid of them then fill hole with bondo. The coin mech seems ok but it doesnt light anymore so im thinking ether replace the bulbs and see if that works or just replace the whole thing from something from happ or twisted. The coin covers are faded from sun. I well have to drill out all locks as I dont want to have to unscrew panels to get to it every time.

    But monitor first.
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  13. #63
    Blame madman
    You Know You Want To.
    madman's Avatar
    Join Date
    Jun 2007
    Location
    Kentucky State Penitentiary

    Posts
    6,115
    So you knew about all the other problems and still bought the cab?
    BATTLE OF THE BABES
    ALLI FLANAGAN vs KELSEY LEWIN

  14. #64
    Crossed Swords Squire
    Damulta's Avatar
    Join Date
    Apr 2017
    Location
    Miami, Oklahoma

    Posts
    195
    Quote Originally Posted by madman View Post
    Anyone want to place odds on 8bitforlife electrocuting himself?
    3 to 1

  15. #65
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Quote Originally Posted by madman View Post
    So you knew about all the other problems and still bought the cab?
    Well i knew it would take work and no i didnt see the sides. Its really not bad just some sanding bondo and primer then paint then decals.

    Its worth it to me neogeo was ny childhood even though i never owned a home console. Iv spent many many hours on the machines in arcades. Bbstars 2 at the peppermil in reno and kotm1/2 in carson city at the golden nugget
    Last edited by 8bitForLife; 04-12-2018 at 07:53 PM.
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  16. #66
    Gandalf Of Gibberish
    Karou's Avatar
    Join Date
    Mar 2010
    Location
    US

    Posts
    4,360

    Thumbs down reading comp

    Quote Originally Posted by Damulta View Post
    3 to 1
    Quote Originally Posted by 8bitForLife View Post
    Jokes on you already did. The cord you plug it in was slightly damaged near plug
    mmmmmmhrkt spam?
    .

  17. #67
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Anyways guy sent new chasis yesterday so hopefully end of this week or early next week
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  18. #68
    drunk downunder!
    aka. Muff Diver.
    lachlan's Avatar
    Join Date
    Feb 2005
    Location
    A Hard Earned Thirst

    Posts
    10,925
    Quote Originally Posted by 8bitForLife View Post
    Anyways guy sent new chasis yesterday so hopefully end of this week or early next week
    Our thoughts and prayers are with you.



    !!

  19. #69
    Member Max_Headroom's Avatar
    Join Date
    Mar 2015
    Location
    USA

    Posts
    38
    Quote Originally Posted by 8bitForLife View Post
    Anyways guy sent new chasis yesterday so hopefully end of this week or early next week
    Be extremely careful and take your time plugging up the new chassis. If something doesn't match up or make sense.. just stop what you are doing and ask questions. Take pictures every time you unplug or plug something in. Make sure the chassis has a connection to the isolation transformer! The neck of the tube can be very fragile so be gentle when removing the old neckbeard and putting the new on.

  20. #70
    Rugal's Thug
    8bitForLife's Avatar
    Join Date
    Oct 2013
    Location
    United States

    Posts
    109
    Working neogeo 6 slot
    https://youtu.be/Cu4PG-lSZN0

    How i feel right now
    https://youtu.be/HSVN3lijfdA
    I well need to mess with some convergence strips but its working and each slot to boot.
    I am a happy camper.
    Last edited by 8bitForLife; 04-16-2018 at 11:09 PM.
    Quote Originally Posted by lachlan View Post
    So you're racist, a fuckhead AND a faggot. Wow that's gotta be a new standard for this place... oh who am I kidding.

  21. #71
    Mr. Big's Thug

    Join Date
    Nov 2014
    Location
    Finland

    Posts
    214
    Congratulations. I don't know if I would have the courage or energy to change chassis on my cabinets even thou I have owned my cabinets for couple years now and know lot more than before buying my cabinets cos one day might have to fix something. hopefully something easy and simple. knock in wood..
    Last edited by godzilla43; 04-17-2018 at 12:06 AM.

  22. #72
    Blame madman
    You Know You Want To.
    madman's Avatar
    Join Date
    Jun 2007
    Location
    Kentucky State Penitentiary

    Posts
    6,115
    Quote Originally Posted by godzilla43 View Post
    Congratulations. Did you change the new chassis or got it working some other way?
    The video is titled, "New chasis installed."
    BATTLE OF THE BABES
    ALLI FLANAGAN vs KELSEY LEWIN

  23. #73
    Mr. Big's Thug

    Join Date
    Nov 2014
    Location
    Finland

    Posts
    214
    Quote Originally Posted by madman View Post
    The video is titled, "New chasis installed."
    I did not click those links.

  24. #74
    You have been
    Officially WY'OWED!
    wyo's Avatar
    Join Date
    May 2013
    Location
    Tampa, FL

    Posts
    4,937
    Quote Originally Posted by godzilla43 View Post
    I did not click those links.
    Good call, they were trojans.
    Neo Geo AES #011035 #036442 | Neo Geo CD #0002814 | MVS Executive | Razion 1cc Club President
    ATTN NOOBS: Jamma Nation X makes the best CMVS & Superguns, PERIOD! | Unofficial MVS and AES Price Guide
    Quote Originally Posted by Karou View Post
    Non dilated pupils pic=Challenge. I got a hundred dollar cd.

  25. #75
    N00b of Syougi
    Join Date
    Jan 2018
    Location
    warlock/kbrightwarrior class heavy destroyer upgrade, E.A.S. Styx.

    Posts
    205

    Exclamation

    Quote Originally Posted by 8bitForLife View Post
    Working neogeo 6 slot
    Spoiler:


    How i feel right now
    [omit]
    I well need to mess with some convergence strips but its working and each slot to boot.
    I am a happy camper.
    FIXED!
    the links go to tube no issue, just they are in feature mode, and doesn't display on my end unless corrected.
    have fun.
    source for relevant:
    Code:
    https://www.youtube.com/watch?v=Cu4PG-lSZN0
    product overview:
    Spoiler:
    PRODUCT SPECIFICATIONS/OVERVIEW OF BRIGHTWARRIOR CLASS WARLOCK DESTROYER UPGRADE::
    http://efni.org/Styx.htm

    WESTINGHOUSE EVENT HORIZON & LOCKHEED/MITCHELL WAVERIDER II class reactors make it possible, like amiga!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •