Super Neo Candy 29: PSU pots/adjustments?

gargoyle7

,
20 Year Member
Joined
Aug 12, 2000
Posts
723
Are there pots to adjust power output for the cab? If so where are they? Pic?

And how hard is it to replace a PSU?

I have a 4 slot board that shows graphic problems only on slot 1 and 2, and someone tested in their cab and say it doesnt happen there, that issue may be with my cab power supply

info? Thoughts?

Thanks much

Lee (garg7)
 

Kid Panda

The Chinese Kid
Joined
Jun 13, 2010
Posts
12,514
Can you take a pic of the front of the psu? It would make it alot easier. Also, do you have a multimeter? You don't want to crank all willy nilly and end up burning up your mobo.
 

gargoyle7

,
20 Year Member
Joined
Aug 12, 2000
Posts
723
Here ya go, thoughts? Where them pots? Yes have a multimeter
 

Attachments

  • IMG_1366.JPG
    IMG_1366.JPG
    413.1 KB · Views: 27
  • IMG_1369.JPG
    IMG_1369.JPG
    348.5 KB · Views: 27
Last edited:

Kid Panda

The Chinese Kid
Joined
Jun 13, 2010
Posts
12,514
IMG_1366.JPG

The red circle is the pot. You'll need a small screwdriver. It only adjusts 5v. You should not go over 5.08. If the board still acts up, then there could be another issue.
 
Top