Results 1 to 6 of 6

Thread: Garou mvs sound issues

  1. #1
    New Challenger

    Join Date
    Dec 2012
    Location
    Sweden

    Posts
    26

    Garou mvs sound issues

    So i got a garou mvs cart dirt cheap , but there is a distortion to some of the soundeffects/music and some sounds just fine.
    Where do i begin to troubleshoot this?
    I have cleaned the contact so thats not it.

  2. #2
    Street Hoop Star
    Niko's Avatar
    Join Date
    May 2014
    Location
    Kentucky

    Posts
    1,424
    Make sure the boards are legit.

    Then check for broken traces or cracked/weak solder joints relating to the M and V roms.

    Lastly check the legs of the PCM IC on the prog board.

  3. #3
    We have purposely
    trained him wrong
    ...as a joke.
    ChuChu Flamingo's Avatar
    Join Date
    Nov 2010
    Location
    US

    Posts
    1,891
    This probably isn't it but I would also clean your volume potentiometer and make sure it is set at 20%-30% and no more. Neo Geo likes to clip/distort a lot of shit once you go past that depending upon your setup. Usually it is high pitched sound effects from my experience.



    he spends hundreds on scarves, of course he's a fag and then ChuChu Flamingo preserved the aftermath in a plastic case making sure it wasn't exposed to unstable air
    You're just upset that you're too goddam stupid to understand the games and whiff infinites.
    Nintendo 64 Pikachu Edition Serial #NS294668665 Nintendo 64 "Funtastic Series" Jungle Green Serial #NS28721865

  4. #4
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    6,912
    I hate to state this but one of the V chips has probably gone bad.
    BB
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  5. #5
    New Challenger

    Join Date
    Dec 2012
    Location
    Sweden

    Posts
    26
    I have checked every solder joint and trace and cant find anything so i guess one of the chips are bad , not much more i can do then.

  6. #6
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    6,912
    It can be repaired but would involve a 4meg SMT and dip adapter...
    BB
    Quote Originally Posted by xardion View Post
    I have checked every solder joint and trace and cant find anything so i guess one of the chips are bad , not much more i can do then.
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •