acblunden2
Rugal's Thug
- Joined
- Nov 1, 2015
- Posts
- 90
Dissected this board to pull the battery to per-emptively fight leakage. Once the parts come in, will do the non-rechargeable battery mod. However, by visual inspection, my 4-slot seems to be a variant that is NOT covered over at JammaNation-X for the battery mod. The board says it is a NEO-MVH M4V. Are the principles the same or is there a guide I can follow along precisely with.
On a side note, this is one of the dirtiest PCB's I have ever seen. She clearly has been tampered with. Seems she was pillaged for spacers. Those will have to be replaced. Also, There is some oxidation on the case. I hear oxalic acid works well to remove metal oxidation. I bought some of that stuff to get rid of hard water stains on my shower glass. Will clean the case with the same stuff and report back the results. Anyone seen a dirtier MVS before ?
On a side note, this is one of the dirtiest PCB's I have ever seen. She clearly has been tampered with. Seems she was pillaged for spacers. Those will have to be replaced. Also, There is some oxidation on the case. I hear oxalic acid works well to remove metal oxidation. I bought some of that stuff to get rid of hard water stains on my shower glass. Will clean the case with the same stuff and report back the results. Anyone seen a dirtier MVS before ?
Last edited: