MobiusStripTech
Mr. Big's Thug
- Joined
- Dec 4, 2017
- Posts
- 201
I've just been asked this question about "What if my system is already RGB modded":-
If the mod was done properly and coupling caps used to feed the RGB and sync signals, then it should work OK in parallel I think.
Looking at the typical OSH park PCB the output of those caps is DC biased but the cap would block that DC, so I suspect it might just work OK in parallel. I am not an expert though, so I could be wrong.
Yeah you should be fine. I wouldn't recommend using the designs off OSHPark anyway, most of them are wrong attenuation.