MVS Marquee Logo Light

ifsixwas9

n00b
Joined
Oct 26, 2017
Posts
10
Hello folks. Sorry if this has been asked and answered, but I can't find the info. I have an MVS-4-25 cabinet which was converted to a 2 slot. The PCB and marquee are 2 slot. I have the MV-ELA and ELD panels, but i don't know how the logo on the left side of the marquee is supposed to be lit. Should there be a flourescent fixture or more EL panels to light the logo? TIA.
 
Last edited:

ifsixwas9

n00b
Joined
Oct 26, 2017
Posts
10
So here is my marquee with the EL Panels working. What I don't know is if the Logo on the left is supposed to have a backlight and if so how is it lit.

38671003276_f8eb4854db_n.jpg
 
Last edited:

acblunden2

Rugal's Thug
Joined
Nov 1, 2015
Posts
90
From what I have seen, you have it functioning properly. If the left side is lit, then the mini marquees are washed out.
 

ifsixwas9

n00b
Joined
Oct 26, 2017
Posts
10
From what I have seen, you have it functioning properly. If the left side is lit, then the mini marquees are washed out.

Thanks. I'd seen some with the logo lit up. I didn't know if they were made that way originally or done by the operators.
 
Top