Results 1 to 10 of 10

Thread: Ikari Warriors jamma adapter?

  1. #1
    Guerilla Warrior
    MCF 76's Avatar
    Join Date
    Jan 2010
    Location
    Doucherville, IN

    Posts
    1,748

    icon28.gif Ikari Warriors jamma adapter?

    Any of you guys know where I can get a jamma adapter for my Ikari Warriors PCB? I found a place that built the PCB type adapter but they have not responded.
    "NG.com breaking balls & crushing dreams since '99".

  2. #2
    Formerly Giltygear
    xROTx
    FilthyRear's Avatar
    Join Date
    Jan 2007
    Location
    Parking in handicap spaces, while handicapped people make handicapped faces

    Posts
    6,639
    Quote Originally Posted by MCF 76 View Post
    Any of you guys know where I can get a jamma adapter for my Ikari Warriors PCB? I found a place that built the PCB type adapter but they have not responded.
    Have you tried KLOV? Someone usually comes through with that type of "oddball" JAMMA stuff.

  3. #3

  4. #4

  5. #5
    J. M Club

    NGT's Avatar
    Join Date
    Jul 2002
    Location
    Northern Bay Area

    Posts
    4,547
    http://www.therealbobroberts.net/harn.html

    Although i don't know if they're open anymore, but that's where i use to get my stuff.
    Last edited by NGT; 11-15-2017 at 08:10 AM.
    .

  6. #6
    Raiden's Valet
    Morden's Avatar
    Join Date
    Jul 2005
    Location
    Neo Geo World

    Posts
    585
    Too bad TNK III adapter isn't compatible. It's really close, but not close enough. Vogatek is selling those for £20 a piece. He has a whole bunch of them, too. They are listed under single titles, but once you click on them, many are compatible with a bunch of games sharing the same pinout. My guess was TNK III, but no dice. Maybe there's some other title I've missed that would be compatible?

    You could also just buy a JAMMA edge slot and one of these, and with some wire and solder, you'd be set. It would cost you $10 and some work.

  7. #7
    Bashful Neophyte
    CharlieBronson's Avatar
    Join Date
    Dec 2017
    Location
    upstate, SC

    Posts
    10
    Quote Originally Posted by MCF 76 View Post
    Any of you guys know where I can get a jamma adapter for my Ikari Warriors PCB? I found a place that built the PCB type adapter but they have not responded.
    Did you ever have any luck finding this?

  8. #8
    The Chinese Kid Kid Panda's Avatar
    Join Date
    Jun 2010
    Location
    Panda Islandô

    Posts
    11,516
    I ordered one from Ian, but it hasn't even been shipped yet, that was like a month ago. I may just build my own.
    No, just no.

  9. #9
    JammaNationX
    Xian Xi's Avatar
    Join Date
    Dec 2005
    Location
    Waipahu, Hawaii

    Posts
    27,542
    I can have one made but I need interest in it. If I can get maybe 10 people to commit then I can move forward. Since it's Ikari, it would have Negatron support and voltmeter support.

  10. #10
    Guerilla Warrior
    MCF 76's Avatar
    Join Date
    Jan 2010
    Location
    Doucherville, IN

    Posts
    1,748
    Quote Originally Posted by CharlieBronson View Post
    Did you ever have any luck finding this?
    Yep got one from Ian haven't tried it out yet, I'll post once i fire it up & report the results.
    "NG.com breaking balls & crushing dreams since '99".

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •