Wachenroder
Galford's Poppy Trainer
- Joined
- Dec 13, 2010
- Posts
- 2,626
So ive gotten a whole bunch of broken stuff over the years. Lots of controllers. Most times I can repair it but the one thing i havent had much luck on is cable replacement. For example...
Thats pulled from a Dualshock controller
I dont know a whole lot about the terminology but I believe this called a 8 Pin header, right angle.
I measured the distance between pins and its 1mm so I believe means its a 1mm pitch.
I would like to buy crimping tool (which are pretty easy to find) and housing and pins but i cant seem to find sets of 1mm pitch connectors. its usually a bunch 2.54mm pitch sets
I know there are a bunch of engineers here. Can somebody give some tips? I'm super confused.
Thats pulled from a Dualshock controller
I dont know a whole lot about the terminology but I believe this called a 8 Pin header, right angle.
I measured the distance between pins and its 1mm so I believe means its a 1mm pitch.
I would like to buy crimping tool (which are pretty easy to find) and housing and pins but i cant seem to find sets of 1mm pitch connectors. its usually a bunch 2.54mm pitch sets
I know there are a bunch of engineers here. Can somebody give some tips? I'm super confused.