Results 1 to 5 of 5

Thread: Savage Reign MVS repair

  1. #1
    Crazed MVS Addict

    Join Date
    Jan 2007
    Location
    In foreverspace

    Posts
    144

    Savage Reign MVS repair

    A friend has a Savage Reign that has a bad ProgTOP pcb. Basically a lot of the cart pins are badly eaten away. Its at that point that trying to salvage the pins by trying to sand then rebuild them back up with solder or something is not going to happen.

    Question is, would the maskroms transfer over ok to a spare ProgBK1 from a NeoCup 98 successfully? If so, does anyone know what the correct jumper settings would be? I know I could always yank another Top from like a WH 2 or something to fix this game, but that wouldn't be cost effective for him, and he does have a spare NeoCup laying around...

  2. #2
    The Chinese Kid Kid Panda's Avatar
    Join Date
    Jun 2010
    Location
    Panda Islandô

    Posts
    12,135
    Has he tried Dexoit or Brasso on the pins yet? I'd rather not kill a Neo Cup 98 for a game to be honest.
    Quote Originally Posted by Skillzguy View Post
    I sometimes wish I didn't have Aspergers as I feel game related collecting would be a mild hobby rather than an obsession.

  3. #3
    Crazed MVS Addict

    Join Date
    Jan 2007
    Location
    In foreverspace

    Posts
    144
    Yeah he already tried Deoxit. After doing that is when he said he saw the extent of the damage, because most of what used to be the pins on a few points simply came off in sections. I have not seen the damage myself, but I'll take his word for it. He said it looked like coke was spilled on the cart at one point and whoever cleaned the cart up only cleaned off the exterior. My understanding is his Neocup 98 is already parted out. All he has left is the BK1 from it. it was in a bin of parts he had bought and he already had someone else use the 512Y to repair a Blazing Star.

  4. #4
    The Chinese Kid Kid Panda's Avatar
    Join Date
    Jun 2010
    Location
    Panda Islandô

    Posts
    12,135
    Ah ok then, I though he wanting to straight kill one.
    Quote Originally Posted by Skillzguy View Post
    I sometimes wish I didn't have Aspergers as I feel game related collecting would be a mild hobby rather than an obsession.

  5. #5
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    6,921
    It will transfer over fine.
    On the PROGBK1 the settings should be:
    JV5, JV4,JV1,JV9,JB3,J13,JV9,JV8,JV7
    BB
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •