Results 1 to 5 of 5

Thread: Neo Geo Daedalus converter, some games wont work, amp voltage???

  1. #1
    Member NeoField's Avatar
    Join Date
    Sep 2017
    Location
    Irvine, CA

    Posts
    34

    Neo Geo Daedalus converter, some games wont work, amp voltage???

    Hi all, having a strange problem with my Daedalus converter and certain games. I am using a 5v USA Neo Geo AES and have read that it can be touchy with my particular system.

    So first tried the converter with my stock power supply and no games would work. I was told to try a power supply with a high amps, so I purchased a 5v5a and all of the games load fine now, but a handful of them freeze during gameplay.

    At first I thought it might be my converter, but I bought one of those cheap ones from Spain off ebay as well and the exact same issues. All of my carts and system have been cleaned as well.

    The following games will freeze within a minute of playing.

    -KOF 2002
    -Last Blade (1-2)
    -All Metal Slugs

    It seems high megs games seem to freeze the system, but games like Rage of Dragons work just fine. My question is, would purchasing another power supply with even high amps, such as a 5v 7a do the job? Any insight or ideas would be greatly appreciated. Thanks

  2. #2
    Formerly Raz_Hoe.
    RAZO's Avatar
    Join Date
    Dec 2006
    Location
    New Jersey

    Posts
    5,494
    So you tried 2 converters and they do the same thing. Maybe it's not the converter but your Neo System. Did you try another Neo System.

  3. #3
    Member NeoField's Avatar
    Join Date
    Sep 2017
    Location
    Irvine, CA

    Posts
    34
    Haven't tried another system, but found a post here awhile back with someone who had the same generation USA system and the same problems with the same games and converter. He eventually just gave up, hoping to find a solution.

  4. #4
    JammaNationX
    Xian Xi's Avatar
    Join Date
    Dec 2005
    Location
    Waipahu, Hawaii

    Posts
    27,500
    When I had a Daedalus in my hands, I don’t have any problems with those games.

    If you are having problems, it could be from the leaning forward as that will break connection with the PROG board in the cart slot. Prop up the MVS cart so the converter sits at a proper 90 degrees. You can also add a bit of foam padding to the front side of the cart opening to keep the cart straight instead.

  5. #5
    Member NeoField's Avatar
    Join Date
    Sep 2017
    Location
    Irvine, CA

    Posts
    34
    Tried that as well, it seems to be the exact same spot in the games, for example, Metal Slug will start but when you make it to the first rock you have to jump over, it always freezes, same with Last Blade, as soon as the game begins the graphics glitch out and it freezes. I have tried both games on an MVS arcade and they are working fine. Both converters same problem, I would just go get another AES console, but I love my old American one with the unibios. I am going to try the 5v 6a and see if that helps.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •