brandonx76
n00b
- Joined
- Feb 24, 2017
- Posts
- 5
Hey folks - thought I would post this here and see if anyone has any thoughts on my NEC XP29's geometry.
I was looking for a local tech (nor cal), but not having much luck. Basically the long and short of it is , I have some warping happening at the bottom left of the screen. Adjusting trapezoid settings via OSD, never quite gets it right. I have another PVM style monitor (Sony 2950) and it's geometry is fine...
Before I go down the path of recapping, (which I was told by a TV tech won't fix this issue although I think that's debatable), I thought I would see if you all had some suggestions?
Here's what's happening -
https://www.youtube.com/watch?v=9CMdePuEeB0
and...here's a list to a post I made on Reddit earlier this year.
https://www.reddit.com/r/crtgaming/...p29_minor_geometry_issue_looking_for_capable/
I'm probably going to try some magnet convergence strips (Which was suggested by someone,) although I'm not sure that would address this issue (it's not a convergence issue) and, then possibly recap myself, but really don't want to ruin an otherwise nice CRT. I'm famliar with arcade crts so don't mind taking a look under the hood, but it's obviously somewhat risky
Any suggestions appreciated.
I was looking for a local tech (nor cal), but not having much luck. Basically the long and short of it is , I have some warping happening at the bottom left of the screen. Adjusting trapezoid settings via OSD, never quite gets it right. I have another PVM style monitor (Sony 2950) and it's geometry is fine...
Before I go down the path of recapping, (which I was told by a TV tech won't fix this issue although I think that's debatable), I thought I would see if you all had some suggestions?
Here's what's happening -
https://www.youtube.com/watch?v=9CMdePuEeB0
and...here's a list to a post I made on Reddit earlier this year.
https://www.reddit.com/r/crtgaming/...p29_minor_geometry_issue_looking_for_capable/
I'm probably going to try some magnet convergence strips (Which was suggested by someone,) although I'm not sure that would address this issue (it's not a convergence issue) and, then possibly recap myself, but really don't want to ruin an otherwise nice CRT. I'm famliar with arcade crts so don't mind taking a look under the hood, but it's obviously somewhat risky
Any suggestions appreciated.