MS2930 super bright image

XeD

Super Sidekicks 2
Joined
Feb 18, 2015
Posts
106
I Have a MS2930 that was working, now I get a Bright blue image. I can barely make out image. Does anyone have any ideas?
 

Heinz

Parteizeit
15 Year Member
Joined
Feb 13, 2005
Posts
22,334
Remote board is definitely connected? Do any of the pots on the remote board affect the image at all?
 

XeD

Super Sidekicks 2
Joined
Feb 18, 2015
Posts
106
Remote board is connected. I can shift the image. I quickly replace the neck board just in case that wenbt bad. Hmm I change. I will be working on It again tonight
 

kuze

Akari's Big Brother
10 Year Member
Joined
Apr 20, 2013
Posts
2,549
Remote board is connected. I can shift the image. I quickly replace the neck board just in case that wenbt bad. Hmm I change. I will be working on It again tonight

Swap the remote board with a known good one and see if that resolves the issue.

One of my buddies had a similar problem and had to clean / reflow the pots on the remote board to get it working properly.

I believe Yaton has a remote board listed on eBay right now if you don't have any spares.
 

XeD

Super Sidekicks 2
Joined
Feb 18, 2015
Posts
106
It end up being a bad transistor (blue chromo)on the neck board. After replacing that from a donor board, I get no sync on the 15khz. 24khz work fine.
 
Top