- Joined
- Mar 8, 2002
- Posts
- 3,686
Pics uploaded again in original thread:
http://www.neo-geo.com/forums/showt...revision-3-4&p=4254881&viewfull=1#post4254881
http://www.neo-geo.com/forums/showt...revision-3-4&p=4254881&viewfull=1#post4254881
Pics uploaded again in original thread:
http://www.neo-geo.com/forums/showt...revision-3-4&p=4254881&viewfull=1#post4254881
To answer your question about the "burnt-looking spot", there's no via in that point. The solder mask is scraped off on the ground plane and the capacitors leads are both soldered there. In my case only one as the other is on the bottom.
Yeah I figured this out after you restored your pics in the other thread. I prefer your method over that ugly mess. Basically a "do no harm approach" that can be reversed with simply desoldering the extra caps.