I had originally bought this cmvs MV-1B from a forum member back in 2012. Upon receiving the unit, RGB output from the system never worked. After trying a few scart to hdmi converters and scart to component adapters, nothing appeared to fix the issue. In the end I decided to get it modded with a neo bitz encoder.
Currently I'm looking to restore the RGB output as I'd like to be able to hook it up to my setup via scart. At the present time it it powers up fine and I'm able to got through the menus via scart, however the main issue is that the system only outputs the color red. My cables were purchased from Retro_console_accessories on ebay. Is there a chance that the cable is wired incorrectly? I was wondering if this was a common issue, or something that can be fixed.
I'll include a video from 2012 that is still an issue along with some photos, of the scart output.
https://www.youtube.com/watch?v=wtcFRmgwIsk
http://s39.photobucket.com/user/1copyright/library/Neo geo
Thanks in advance guys!
Currently I'm looking to restore the RGB output as I'd like to be able to hook it up to my setup via scart. At the present time it it powers up fine and I'm able to got through the menus via scart, however the main issue is that the system only outputs the color red. My cables were purchased from Retro_console_accessories on ebay. Is there a chance that the cable is wired incorrectly? I was wondering if this was a common issue, or something that can be fixed.
I'll include a video from 2012 that is still an issue along with some photos, of the scart output.
https://www.youtube.com/watch?v=wtcFRmgwIsk
http://s39.photobucket.com/user/1copyright/library/Neo geo
Thanks in advance guys!
Last edited: