NeoGeo AES Verticle line mod

retronerd

retronerd

New Challenger
Joined
Apr 23, 2016
Posts
68
I cut the three traces on the underside of the motherboard i have an 3-6 mobo.

The problem is that the image is wobbling?

https://youtu.be/hYvsCnpbiWk

I also fitted a socket for the bios, can that be the problem?
 
Last edited:
mikejmoffitt

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
Okay... which three traces did you cut? Have you considered putting them back?

Are you doing an RGB bypass or something?

The socketed BIOS would not cause this problem. Try reconnecting the traces you severed and see which is responsible.
 
retronerd

retronerd

New Challenger
Joined
Apr 23, 2016
Posts
68
mikejmoffitt said:
Okay... which three traces did you cut? Have you considered putting them back?

Are you doing an RGB bypass or something?

The socketed BIOS would not cause this problem. Try reconnecting the traces you severed and see which is responsible.
Click to expand...

This one!
293as11.jpg
i reconnected the trace but the image is still wobbling. i then did the rgb bypass mod and the wobbling is gone but the image colors isnt right?
 
You must log in or register to reply here.
Top