- Joined
- Dec 7, 2000
- Posts
- 12,008
I got a couple of junk AES systems from Japan. This one is a 3-3 board, and was not powering up. I removed the dead NEO-POWER daughter board inside that was converting the system from 5v to a higher voltage. The system powers on now and plays. The video looks good. However, there is still no audio.
There is no audio from the headphone jack or the A/V out. Should I buy a cap kit like this one?
https://console5.com/store/neo-geo-aes-neo-aes-3-5-cap-kit.html
I'm not great at replacing caps. Is this problem most likely a cap issue, or is it possibly a problem with a chip? Is there any way to test if the caps are for sure the problem?
There is no audio from the headphone jack or the A/V out. Should I buy a cap kit like this one?
https://console5.com/store/neo-geo-aes-neo-aes-3-5-cap-kit.html
I'm not great at replacing caps. Is this problem most likely a cap issue, or is it possibly a problem with a chip? Is there any way to test if the caps are for sure the problem?