Results 1 to 6 of 6

Thread: dual mod T5 stick for Neo Geo

  1. #1
    Bub & Bob's Bubble Buddy
    AJtheMishima's Avatar
    Join Date
    Jun 2009
    Location
    Houston, Tx

    Posts
    1,620

    dual mod T5 stick for Neo Geo

    I have a t5 stick that currently has a ps3 Cthulhu board w/screw terminals and i want to add a DA15 and wire it to play on the neo geo. Can i just piggy back all the wires from the da15 to the corresponding buttons on the ps3 board. I would also connect the grounds together and connect pin 8 to the ps3 boards 5v.
    Does that sound about right? If im able to pass everything through the ps3 board that would make life alot easier for me.



    neoplus.png


    CthulhuPCB.png
    ***CLICK HERE FOR FIGHTCADE TUTORIAL***

    PSN: MountainDewFKR
    FIGHTCADE: MountaindewFKR

    GAMER > COLLECTOR

  2. #2
    Kyo's Flame
    DanAdamKOF's Avatar
    Join Date
    Jun 2002
    Location
    Sunnyvale, CA http://www.twitch.tv/danadamkof

    Posts
    8,144
    I've wired a 360 TE with Kitty PCB to NeoGeo and it works. Link stick' sVCC to NG's VCC and stick's GND to NG's GND, the NeoGeo itself is the other PCB in this dual mod What you've written sounds solid.

  3. #3
    King's Bartender
    Lemony Vengeance's Avatar
    Join Date
    Jan 2012
    Location
    A dried up lake bed

    Posts
    5,040
    this is absolutely crucial.

    you NEEEEEED 5v Wired to the 15 Pin connector/cable on BOTH sides or you're going to have issues.

    I made a Tri-mod (dual-mod MC Cthulhu with a DB15 pin socket) for Berry Toggard and he complained that his neo wasn't working with it... Turns out he didn't have 5v wired from his CMVS to the controller port. He rewired that and the issue was FIXED.
    It's impossible to be a nice guy on the internet.

  4. #4
    Bub & Bob's Bubble Buddy
    AJtheMishima's Avatar
    Join Date
    Jun 2009
    Location
    Houston, Tx

    Posts
    1,620
    Quote Originally Posted by Lemony Vengeance View Post
    this is absolutely crucial.

    you NEEEEEED 5v Wired to the 15 Pin connector/cable on BOTH sides or you're going to have issues.

    I made a Tri-mod (dual-mod MC Cthulhu with a DB15 pin socket) for Berry Toggard and he complained that his neo wasn't working with it... Turns out he didn't have 5v wired from his CMVS to the controller port. He rewired that and the issue was FIXED.
    If i will be using this on a stock mvs or aes do i have to worry about this extra step or is it only if its a cmvs?
    ***CLICK HERE FOR FIGHTCADE TUTORIAL***

    PSN: MountainDewFKR
    FIGHTCADE: MountaindewFKR

    GAMER > COLLECTOR

  5. #5
    Kyo's Flame
    DanAdamKOF's Avatar
    Join Date
    Jun 2002
    Location
    Sunnyvale, CA http://www.twitch.tv/danadamkof

    Posts
    8,144
    It's already wired on stock ports.


    Sent from my iPhone using Tapatalk

  6. #6
    Bub & Bob's Bubble Buddy
    AJtheMishima's Avatar
    Join Date
    Jun 2009
    Location
    Houston, Tx

    Posts
    1,620
    cool so i should be golden
    ***CLICK HERE FOR FIGHTCADE TUTORIAL***

    PSN: MountainDewFKR
    FIGHTCADE: MountaindewFKR

    GAMER > COLLECTOR

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •