- Joined
- Apr 3, 2011
- Posts
- 5,849
Recently assembled a consolized MV-1AX, here are the pinouts for the controller and RGBS, yes they're quite a bit different from the 1FZ.
These may apply to the MV-1A, I don't have one though.
The Sync signal is kind of hard to find on this board, the closest point I could find to the RGB was one tiny little via across from the BIOS.
These may apply to the MV-1A, I don't have one though.
The Sync signal is kind of hard to find on this board, the closest point I could find to the RGB was one tiny little via across from the BIOS.