Results 1 to 2 of 2

Thread: Sega CD Model 2 battery change

  1. #1
    Camel Slug
    grendelrt's Avatar
    Join Date
    Apr 2014


    Sega CD Model 2 battery change

    Figured I would post this on here in case anyone is looking. Saw another thread on the forum that was really old asking.

    My battery died in the sega cd so I could no longer save to the cd side backup ram. Pretty simple change. I removed the old battery and then soldered lines off the motherboard to a CR2032 vertical holder. By doing this it keeps it outside of the RF shielding, so next time the battery dies I can just open the system and swap instead of having to remove all the shielding. I used a rechargeable 2032 instead of the stock 2016 that was in it, figure it will give me longer charge time. There was corrosion under the old battery, so not a bad idea to replace it. I left the system on for like 6 hours to recharge the battery after replacement.

  2. #2
    Yamazaki's Pupil
    ballzdeepx's Avatar
    Join Date
    Sep 2004
    Nakatomi Towers

    Nice job man, I need to do this next time I'm in there.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts