xRealNinjuzx
Astra Superstar
- Joined
- Dec 28, 2003
- Posts
- 657
Ok. So I bought an official Konami PCMCIA flash card from a dude on eBay to use on my DDR Solo machine. The card came out of a Code 1 Dispatch machine which runs on Viper hardware. When I put it into the 573 in the DDR machine, it didn't recognize the card at all. I bought another official Konami card that came out of a DDR 5th Mix and it also didn't work because it got damaged in the mail, but the 573 still picked up that it was there and still installed about 10% before it gave me the error for using a bad card. So here is the question: Is there a difference between the cards that were used between the 2 different pieces of hardware? The cards are obviously visually different with the Code 1 Dispatch card being a small card inserted into an official Konami adapter and the DDR card just being a single large card. I cant figure out if the Code 1 Dispatch card will work for something else and just isn't correct for a DDR machine or if it is just a dead card and should be thrown away.
Any help would be useful. Thanks guys.
Any help would be useful. Thanks guys.