Speed3
Marked Wolf
- Joined
- Jul 7, 2015
- Posts
- 215
I picked up a 2 slot cab a while back that... How do you say ... Needed some TLC. So I immediately got to work and put a new exhaust on my car from the header to the tip. But then I finaly got around to ... building an AR15. But now this time for real I started working on the cab.
Not the best photo of her. She actually looked okay from a distance.
But it's what's on the inside that counts. And inside she was as filthy as could be.
After some cleaning I discovered that the battery let go several years ago and ate the traces up pretty badly.
And here she is in the nude waiting for some sanding and some bondo.
I'm going to get some quotes for Formica if it's too much I'll buy the tools and give it a try my self.
I figure I'll tinker around with it a little if I can't get the board working I have a MV-1C I can throw in in a pinch.
Not the best photo of her. She actually looked okay from a distance.
But it's what's on the inside that counts. And inside she was as filthy as could be.
After some cleaning I discovered that the battery let go several years ago and ate the traces up pretty badly.
And here she is in the nude waiting for some sanding and some bondo.
I'm going to get some quotes for Formica if it's too much I'll buy the tools and give it a try my self.
I figure I'll tinker around with it a little if I can't get the board working I have a MV-1C I can throw in in a pinch.