In a cabinet? Outtrigger has the joystick wired to the normal up/down/left/right. Trigger and top button are b1 and b2. Jump sound be b3. Trackball IO chains after the jvs io with a normal usb cable. The virtua golf manual has the trackball wiring diagram.
I don't have a VOOT setup but I think the left stick wires to player 1 and the right stick to player 2.
Thanks. I used the wiring diagram in Virtua Golf manual to daisy chain my Sega JVS Type1 I/O with Optical I/O board. However, my Naomi doesn't recognizes it when I do this. In fact, in JVS Test mode has it listed as "No Jamma I/O board". With just the Optical I/O board plugged into the Naomi system, the test will recognize it, but the game won't boot correctly without Sega JVS Type1.
I also tried plugging both I/O board into separate USB ports on the Naomi system which resulted in "No Jamma I/O board" in test mode as well. I've tried this on my Naomi1 and Naomi2 system.
Maybe my Sega JVS Type1 I/O board is too old of a revision? It came from my House of the Dead 2 which one of the oldest Naomi games.