omegasit
Crossed Swords Squire
- Joined
- May 15, 2014
- Posts
- 181
I just ordered a Golden Axe PCB through eBay and I am getting no sound. I have it going in through a supergun. I use a Sega 16 to Jamma converter. I tried the one that came with the board and no sound. I tried the one I have for my Shinobi board and still get no sound. Both converters work on my Shinobi board though. I messaged the seller and this is what he said:
"I wonder if for whatever reason the golden axe board isn't making contact with the audio pin on the connector. I had a similar issue from having a board pulled too tight and short wires
Some cabs like one i have has the speakers going directly to the board and not through the harness. His Shinobi may have the speakers directly to the board so when he uses the harness on the Golden Axe....no sound!"
Does this make sense? Is there something I should do?
"I wonder if for whatever reason the golden axe board isn't making contact with the audio pin on the connector. I had a similar issue from having a board pulled too tight and short wires
Some cabs like one i have has the speakers going directly to the board and not through the harness. His Shinobi may have the speakers directly to the board so when he uses the harness on the Golden Axe....no sound!"
Does this make sense? Is there something I should do?