So I've acquired an AES from a fellow member and i'm having a bit of trouble identifying which region it's from. Can probably rule out Japan, games display in English.
Has the following detail:
NEO-AEC
8W
Pro-Pow-E Adapter (Runs at 240v, 2-pin Euro plug)
067817
Has a 3-5 PCB and the following jumpers are set:
When I test games, because of the TV i'm using I can't tell from the display (borders) as it weaves magic and supports all variations of PAL/NTSC/SECAM signals and auto formats the image.
I'm leaning towards it being an NTSC (US) system because of the jumper settings and xtal value (3.58) but then it takes a 240v input which goes against the logic I've used in the past to define the region a console is from.
I've scoured the forums and the internet in general but keep seeing information that contradicts the last nugget of knowledge I've read.
Also i'm guessing this is the best revision for RGB output as that's all i'll be using.
Any clarification would be greatly appreciated.
Has the following detail:
NEO-AEC
8W
Pro-Pow-E Adapter (Runs at 240v, 2-pin Euro plug)
067817
Has a 3-5 PCB and the following jumpers are set:
When I test games, because of the TV i'm using I can't tell from the display (borders) as it weaves magic and supports all variations of PAL/NTSC/SECAM signals and auto formats the image.
I'm leaning towards it being an NTSC (US) system because of the jumper settings and xtal value (3.58) but then it takes a 240v input which goes against the logic I've used in the past to define the region a console is from.
I've scoured the forums and the internet in general but keep seeing information that contradicts the last nugget of knowledge I've read.
Also i'm guessing this is the best revision for RGB output as that's all i'll be using.
Any clarification would be greatly appreciated.