My OKBaby recently developed a monitor fault where the bottom half of the image will be vertically fragmented and the top of the screen would have a black dip that gets worst when you stretch it out using the remote board.
Thankfully, these symptoms go away when the monitor warms up or when a hair dryer was used on the chassis.
This lead me to believe that a couple of components on the chassis is faulty.
I proceeded to get a electronic component cold spray to test a couple capacitors to see if the problem returns when the chassis was all warmed up.
Sure enough, 2 x capacitors were replicating the same problem when the spray was applied.
I will update when I replace the capacitors to see if it fixes the problem.
Thankfully, these symptoms go away when the monitor warms up or when a hair dryer was used on the chassis.
This lead me to believe that a couple of components on the chassis is faulty.
I proceeded to get a electronic component cold spray to test a couple capacitors to see if the problem returns when the chassis was all warmed up.
Sure enough, 2 x capacitors were replicating the same problem when the spray was applied.
I will update when I replace the capacitors to see if it fixes the problem.