Replacement 15 pin (3x5) male molex connector for control panel

My cab had been converted to a mame cabinet so my original connectors were cut. I was curious if anyone could help me find the size of the male molex connector needed to connect the snk wiring harness to the control panel.

The parts that I ordered are .062 Male Plug Connector
The other option is the 15 Pin (3x5) Molex .093 Male Plug Connector w/Pins 03-09-2158

Any help would be much appreciated!

Attached is a pic of the female connector on the snk harness:

It would be easier to find a new set of male and female connectors and redo the wires from scratch.

I agree, you're gonna need to rewire everything anyway, you might as well use a fairly easy to obtain part. I'd get some extras as well and store them in the cab.

Just got the .062 5x3 15 pin connector in the mail, and it fits like a glove!

Here is the link to the part in case anyone in the future has the same issue-

.062 5x3 15 pin molex connector