bustedstr8
Trollbox Trade Federation,
- Joined
- Oct 15, 2007
- Posts
- 943
I had a bunch of 27C4096 so I went with those.
Remove J10 and move to J1 if needed. Seems like most boards will have J1 populated all ready.
Use a pull up resistor on the P1 /OE from the bottom of J8,J9 or J10 to the top of JB5 or JB6
Split 941-P1. First 512KB on EP1, Second 512KB on EP2. Burn onto two 27C4002/27C4096 eproms 120ns or faster.
Remove J10 and move to J1 if needed. Seems like most boards will have J1 populated all ready.
Use a pull up resistor on the P1 /OE from the bottom of J8,J9 or J10 to the top of JB5 or JB6
Split 941-P1. First 512KB on EP1, Second 512KB on EP2. Burn onto two 27C4002/27C4096 eproms 120ns or faster.