aha2940
AH, A, COLUMBIAN!,
- Joined
- Dec 15, 2013
- Posts
- 2,528
Hi
I already read some documents on how to do it, and I think I have a clear understanding of it. I would like, however, a recommendation from you guys on the parts to use to get best results. The SG would be used with a Neo MV1C and also would like it to work with CPS1/2 boards. So far, I have selected these parts, would like to know your opinions:
Video Encoder: Neobitz
Power supply: PicoPSU 80: http://www.mini-box.com/picoPSU-80
Jamma harness: http://www.jammaboards.com/store/jamma-full-cabinet-wiring-harness-loom-jamma-h1.html
Stick and buttons: These SANWA: http://www.ebay.com/itm/261313749906?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I believe these are the important parts, the rest are pretty standard connectors and solder which should be all the same.
Recommendations/opinions are very welcome guys.
Thanks!
I already read some documents on how to do it, and I think I have a clear understanding of it. I would like, however, a recommendation from you guys on the parts to use to get best results. The SG would be used with a Neo MV1C and also would like it to work with CPS1/2 boards. So far, I have selected these parts, would like to know your opinions:
Video Encoder: Neobitz
Power supply: PicoPSU 80: http://www.mini-box.com/picoPSU-80
Jamma harness: http://www.jammaboards.com/store/jamma-full-cabinet-wiring-harness-loom-jamma-h1.html
Stick and buttons: These SANWA: http://www.ebay.com/itm/261313749906?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I believe these are the important parts, the rest are pretty standard connectors and solder which should be all the same.
Recommendations/opinions are very welcome guys.
Thanks!